重复性
滚珠丝杠
小型化
偏移量(计算机科学)
执行机构
旋转(数学)
线性执行器
控制理论(社会学)
模拟
计算机科学
工程类
机械工程
数学
电气工程
人工智能
统计
螺母
程序设计语言
控制(管理)
作者
Doo Hyun Cho,Hyo-Chan Kwon,Kwon-Hee Kim
出处
期刊:Applied sciences
[Multidisciplinary Digital Publishing Institute]
日期:2022-01-10
卷期号:12 (2): 657-657
被引量:2
摘要
Recently, due to the miniaturization of electronic products, printed circuit boards (PCBs) have also become smaller. This trend has led to the need for high-precision electrical test equipment to check PCBs for disconnections and short circuits. The purpose of this study is to improve the position repeatability of the platform unit up to ±2.5 μm in linear stage type test equipment. For this purpose, the causes of the position errors of the platform unit are analyzed. The platform unit holding the PCB is driven by a single-axis linear ball screw drive system offset from its geometric center due to design constraints. The yaw rotation of the platform is found to have a dominant effect on position repeatability. To address this problem, adding balancing weights to the platform unit and adjusting the stiffness of the LM Guides are proposed. These methods reduce the yaw rotation by moving the centers of mass and stiffness closer to the linear ball screw actuator. In the verification tests, the position repeatability was decreased to less than ±1.0 μm.
科研通智能强力驱动
Strongly Powered by AbleSci AI