Fe‐doped MOF‐derived N‐rich porous carbon nanoframe for H2S cataluminescence sensing

Metal-doped porous carbon matrix composites are considered as outstanding H2 S cataluminescence sensing materials for their good sulfur tolerance and high cataluminescence activity. In this work, an Fe-doped MOF-derived N-rich porous carbon nanoframe was successfully fabricated using the pyrolysis of Fe-doped ZIF-8 in an Ar atmosphere at a temperature of 900°C, and used for H2 S cataluminescence sensing. Along with zinc volatilization, the obtained porous carbon nanoframe not only had high specific surface area and abundant voids, but also had well dispersed Fe species doped in the skeleton. Compared with Fe2 O3 /ZnO composites derived from the same precursor but different pyrolysis terms, this as-prepared Fe-doped N-rich porous carbon presented a three times increase in the cataluminescence intensity towards H2 S, attributed to the porous carbon skeleton that is indispensable for dispersing catalytic active sites and providing more absorptive surface and voids. Comparably, this proposed sensor demonstrated high sensitivity and good selectivity, with the detection range of 1.57-19.58 μg·ml-1 and detection limit of 0.13 μg·ml-1 towards H2 S. This work may provide a new pathway for preparing catalysts for cataluminescence sensing with better metal distribution, higher specific surface area, and richer pores than ever before.