佩多:嘘
材料科学
能量转换效率
钙钛矿(结构)
硼氢化钠
光电子学
化学工程
纳米技术
图层(电子)
化学
催化作用
有机化学
工程类
作者
Xianhu Wu,Daomei Wu,Guanglei Cui,Zezhuan Jiang,Chunyi Zhao,Xiangyu Tang,Xuting Dong,Nian Liu,Zewen Zuo,Lingbing Kong,Min Gu
出处
期刊:Solar RRL
[Wiley]
日期:2022-11-11
卷期号:7 (1)
被引量:17
标识
DOI:10.1002/solr.202200833
摘要
Poly(3,4‐ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) is widely used as a hole transport layer in inverted perovskite solar cells (PSCs). However, due to the serious interface defects, imperfect energy level arrangement, and low hole transfer rate between PEDOT:PSS and perovskite, the realization of efficient and stable inverted PSCs is hindered. Herein, ionic salt sodium borohydride is used as an interfacial modifier between PEDOT:PSS and MAPbI3−xClx. NaBH4 acts as an anchor to bond Pb2+ to the PEDOT:PSS surface and guides the growth of the perovskite. The champion power conversion efficiency (PCE) of the device based on NaBH4‐PEDOT:PSS reaches 20.21%, which is improved by 27.5% compared with the device based on PEDOT:PSS (15.84%). This PCE is one of the highest in inverted PSCs with PEDOT:PSS as the hole transport layer and MAPbI3−xClx as the active layer. The improved device performance is mainly attributed to the reduced valence band edge of PEDOT:PSS which matches better with the HOMO of MAPbI3−xClx, and the hole transfer rate is increased from 2.65 × 1010 to 3.69 × 1010 s−1. The long‐term stability of the optimized device exceeds 1000 h. This work provides a simple and effective strategy to improve the PCE and stability of inverted PSCs, which is a benefit for future popularization.
科研通智能强力驱动
Strongly Powered by AbleSci AI