脱墨
材料科学
氢氧化钠
硅酸钠
墨水池
制浆造纸工业
牙髓(牙)
产量(工程)
环境友好型
化学工程
工艺工程
废纸
废物管理
复合材料
工程类
医学
病理
生态学
生物
作者
Raktawan Muangnamsuk,Santi Chuetor,Suchata Kirdponpattara
摘要
For the recycling paper process, the main problem is a high residual ink left on the paper, affecting the recycled paper's quality. Especially for laser-printed paper, ink strongly interacts with the paper fiber. A conventional chemical deinking has been used to remove laser ink with a high deinking efficiency but a low yield of recycled paper pulp. Recently, enzymatic deinking has gained attention due to its friendly environment. However, a complex procedure is required, and ink removal efficiency is lower than the conventional method. This research aims to simplify a chemical deinking process by decreasing reaction time, optimizing chemical components, and reducing experimental steps. Without pulping step, the laser-printed paper sheet was immersed in the chemical solution for a specific time, and the ink was removed by water spray. Results revealed that the chemical solution containing 1.5% sodium hydroxide, 2% sodium silicate, 1% hydrogen peroxide, and 0.3% tween-80 with a reaction time of 5 min at 60°C gave the highest paper yield of 97.3% and the lowest dirt count of 89.0 mm 2 /m 2 . The final product was still in the form of a paper sheet.
科研通智能强力驱动
Strongly Powered by AbleSci AI