平坦度(宇宙学)
研磨
正多边形
材料科学
曲面(拓扑)
机制(生物学)
运动学
薄脆饼
几何学
偏心率(行为)
光学
数学
物理
复合材料
经典力学
纳米技术
量子力学
法学
宇宙学
政治学
作者
Bo Pan,Renke Kang,Xu Zhu,Dongxing Du,Wen Huang,Jiang Guo
标识
DOI:10.1016/j.jmatprotec.2022.117749
摘要
Double-sided lapping process is a key technology for obtaining high efficiency and flatness in fabricating plane-parallel workpiece surfaces, such as wafers, optical windows, seal rings, etc. However, the formation of the concave and convex surface shapes of workpieces was rarely investigated in the previous research, and the mechanism was unknown. This paper establishes a new kinematic model to clarify the formation mechanism of concave and convex surface shapes, in which the workpiece eccentricity and rotation in the planetary wheel are considered for the first time. The measurement and control method of workpiece rotational speed in the planetary wheel is proposed. The formation of the concave and convex surface shapes is validated experimentally by adjusting the rotational speed of the workpiece, and the results show a good consistency with the calculation results. A flatness error convergency method is proposed based on the surface shape formation mechanism, and flatness superior to 5 µm is achieved on Φ200 × 2 mm thin copper substrates.
科研通智能强力驱动
Strongly Powered by AbleSci AI