作者
Piyali Saha,Soumya Sen,Prabhat Singh,Ashish Raman
摘要
A search for novel semiconductor substance that can transcend the physical constraints of silicon-based field effect transistors (FETs) having channel lengths nearing 5 nm has grown critical. The unusual physical, mechanical, and chemical features of graphene, a two-dimensional (2D) stacked semiconductor nanomaterial, have provided them attractive possibilities. 2D stacked nanomaterials, in contrast to conventional silicon-based FETs, are bound together through van der Waals forces on surface rather than dangling bonds on the physical interface. This allows them to efficiently address that short-channel effect problem that conventional silicon-based FETs encounter. However, research continues to be conducted on the semiconductor substance procurement and production methods for 2D FETs, in contrast to conventional silicon-based FETs, which have developed manufacturing processes. As the device’s material, we can utilize graphene, hexagonal boron nitride (h-BN), and transition metal dichalcogenides (TMDs). Graphene has remarkable carrier mobility, negligible bandgap, and great electrical conductivity. Bandgap-containing TMDs, involving MoS₂ and WS₂, are essential for switching applications. h-BN is a common insulating layer because of its excellent dielectric characteristics. In this task, we examine the structural representation as well as fabrication processes of 2D material FETs as well as their electrical efficiency. First, we present a variety of techniques for collecting and moving 2D semiconductor elements. Next, we go over the specific steps involved in fabricating 2D FET devices, such as oxide layer development, lithography, deposition, and electrode design. Next, we use 2D MoS 2 to manufacture FETs and then analyze the devices’ output features as well as the transfer V–I characteristics of the top gate and back gate, respectively. The first chapter describes the 2D FET device. We covered Moore’s Law and short-channel effects, and this chapter discusses 2D MoS 2 structures and the metal oxide FET structure. Chapter 2 covers the 2D material-based FET’s operating theory. This chapter describes the 2D FET’s V–I properties and operating concept. The production method for 2D material-based FETs is covered in the third chapter. It consists of material transfers and preparations in two dimensions, followed by the production of device electrodes. The construction of 2D FETs is explained in Chapter 4 , along with electrical performance testing, MoS 2 characterizations, and the effect of metal-semiconductor contact on device performance. Chapter 5 describes how 2D FETs will be improved in the future.