Flexible piezoelectric sensor based on polyvinylidene fluoride/polyacrylonitrile/carboxy-terminated multi-walled carbon nanotube composite films for human motion monitoring

Flexible piezoelectric devices have attracted much attention in the fields of intelligent devices and biomedicine because of their high sensitivity, stability, and flexibility. In this paper, a multifunctional flexible pressure sensor was prepared by adding polyacrylonitrile (PAN) and carboxylic-terminated multi-walled carbon nanotubes (c-MWCNTs) with polyvinylidene difluoride (PVDF) as the substrate. Theβ-phase content of PVDF/PAN blended fibers compounded with c-MWCNT was up to 95%. At the same time, when PAN was added, the mechanical properties of the composite fibers were constantly improved. The results show that the polymer blending method can improve the comprehensive properties of PVDF composite. The flexible sensor prepared from the PVDF/PAN/c-MWCNT composite film has an output voltage of 2.1 V and a current of 7μA. The addition of c-MWCNT can largely improve the sensitivity of the sensor (4.19 V N^-1). The sensor is attached to the finger and shows good output performance under different degrees of bending of the finger. The maximum output voltage of the sensor is 0.4 V, 0.56 V and 1.15 V when the finger bending angle is 30°, 60°, and 90°, respectively. Moreover, the developed piezoelectric sensor can monitor large-scale movements of various parts of the human body. Therefore, this composite material shows potential in areas such as motion monitoring and energy storage devices.