Nanoarchitectonics of bamboo-based heterojunction photocatalyst for effective removal of organic pollutants

A high-performance photocatalyst with both efficient and reusable performance is essentially demanded for the purification of organic wastewater and the removal of indoor formaldehyde. However, recovery of photocatalyst particles from the reaction system remains a challenge. Herein, based on the abundant pore structure of natural bamboo and the outstanding photocatalytic activity of ZnO/WO3, we fabricated an efficient bamboo-based photocatalyst (ZnO/WO3@bamboo) for the efficient photocatalytic degradation of formaldehyde and organic dyes. The pretreatment of bamboo substrates with NaOH solution resulted in the formation of nucleation sites for ZnO/WO3 growth within bamboo cellulose channels. Subsequently, the as-prepared ZnO and WO3 were mixed in different mass ratios, and loaded on the pretreated bamboo substrates using the hydrothermal method. The results showed that the ZnO/WO3@bamboo had the effective function of photocatalytic degradation of formaldehyde gas and organic dyes. Moreover, the as-prepared ZnO/WO3@bamboo photocatalyst demonstrated superior recycling ability toward organic pollutants, which was described by photocatalytic degradation efficiency of formaldehyde gas more than 89% after 10 cycles, and organic dyes over 93% after 20 cycles. The coupling of ZnO and WO3 leads to electron delocalization, which caused the electron holes generated in the valence band (VB) of ZnO to delocalize to the VB of WO3, and reduced the recombination of electron-hole. Therefore, the photocatalytic degradation performance of the ZnO/WO3@bamboo was enhanced. The proposed ZnO/WO3@bamboo photocatalyst holds great promise in the field of air pollution and wastewater remediation.