材料科学
进程窗口
选择性激光熔化
微观结构
热导率
过程(计算)
复合材料
过程变量
电导率
激光器
材料性能
航空航天
冶金
光学
光电子学
计算机科学
政治学
平版印刷术
法学
化学
物理化学
物理
操作系统
作者
Karolien Kempen,Lore Thijs,J. V. Humbeeck,Jean‐Pierre Kruth
标识
DOI:10.1179/1743284714y.0000000702
摘要
Owing to their attractive combination of mechanical properties, high heat conductivity and low weight, the Al–Si alloys found a large number of applications in the Additive Manufacturing field for automotive, aerospace and domestic industries. However, due to their high reflectivity and heat conductivity, they are harder to process by Selective Laser Melting. This work elaborates on both the optimisation of process parameters, in order to get nearly fully dense parts, and the material properties resulting from this specific material process combination. A process parameter window is defined, in which the formed melt pool is stable and meets the set requirements. In this process window, the parameter set for optimal density is defined. It is shown that AlSi10Mg parts produced by SLM have mechanical properties higher or at least comparable to the cast material because of the very fine microstructure.
科研通智能强力驱动
Strongly Powered by AbleSci AI