材料科学
微晶
缓冲器(光纤)
退火(玻璃)
光电子学
氧化物
铟
结晶度
热稳定性
图层(电子)
外延
氧化镓
德拉姆
镓
薄脆饼
薄膜
纳米技术
等效氧化层厚度
半导体
压力(语言学)
阈值电压
电子工程
热的
钝化
纳米
作者
Dong-Gyu Kim,Hye-Jin Oh,Tae Woong Cho,Jae-Hyeok Kwag,Jaeseok Hur,Sunghyun Choi,Kwangmin Park,Jin-Seong Park
标识
DOI:10.1021/acsaelm.6c00118
摘要
Oxide semiconductors show promise as DRAM channel materials owing to their low leakage, good mobility, and the possibility of deposition. However, high thermal stability up to 700 °C is essential for DRAM processing, which is challenging for many oxide semiconductors. In this study, crystalline indium gallium oxide (IGO) thin films were deposited on different buffer layers (amorphous SiO 2, crystalline ZrO 2, and HfO 2 ). When IGO was deposited on the SiO 2 buffer layer at a ratio of 5:1, the crystallinity changed rapidly after the post-treatment, and the mobility increased from 61.9 to 96.7 cm 2 /(V s). This suggests that the SiO 2 buffer layer made the sensitivity greater to the annealing temperature. By contrast, the IGO on the HfO 2 buffer layer maintained a stable polycrystalline structure even after high-temperature annealing. It exhibited minimal mobility variation from 18.4 to 22.5 cm 2 /(V s) and demonstrated excellent reliability, with a threshold voltage (V TH ) shift of only 0.04 V under positive bias temperature stress at +3 MV/cm and 95 °C. These findings highlight that the surface condition of the buffer layer is crucial for maintaining the thermal stability of crystalline oxide semiconductors. Especially, the polycrystalline IGO remains highly stable even on the HfO 2 buffer layer, which is commonly used in DRAM.
科研通智能强力驱动
Strongly Powered by AbleSci AI