聚对苯二甲酸乙二醇酯
材料科学
吸水率
乳状液
粘附
甲基丙烯酸酯
极限抗拉强度
复合材料
聚乙烯
接触角
化学工程
乳液聚合
胶粘剂
聚酯纤维
基质(水族馆)
高分子化学
增容
吸收(声学)
聚合物
乳酸
胶体
作者
Junqing Xi,Chenglong Jiao,Chao Liu,Shixiong Sun,Benbo Zhao,Yunjun Luo
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2026-10-08
卷期号:18 (19): 2453-2453
标识
DOI:10.3390/polym18192453
摘要
To address the poor adhesion of waterborne inks to polyethylene terephthalate (PET) films, a low-temperature ketone-hydrazide self-crosslinking system based on 2-(acetoacetoxy)ethyl methacrylate (AAEM) and adipic acid dihydrazide (ADH) was incorporated into a waterborne polyurethane-acrylate emulsion. Self-crosslinking waterborne polyurethane-acrylate emulsions (AWPUAs) with different AAEM contents were prepared and subsequently used as binders in waterborne inks for PET films. The results showed that increasing the AAEM content reduced the water absorption of the latex films while increasing their water contact angle and tensile strength. Meanwhile, the adhesion of the resulting waterborne inks to corona-treated PET films increased with increasing AAEM content, together with a substantial enhancement in re-solubility. At an AAEM content of 7 wt%, the AWPUA emulsion exhibited good colloidal stability, and the corresponding waterborne ink achieved nearly 100% adhesion while maintaining good re-solubility. These findings demonstrate that AAEM/ADH ketone-hydrazide self-crosslinking modification provides an effective approach for improving the film properties of waterborne polyurethane-acrylate emulsions and the application performance of waterborne inks on PET films.
科研通智能强力驱动
Strongly Powered by AbleSci AI