宽带
干涉测量
声学
度量(数据仓库)
遥感
分布式声传感
航程(航空)
振幅
噪音(视频)
信号(编程语言)
地质学
频带
光时域反射计
瑞利散射
光纤传感器
校准
灵敏度(控制系统)
瑞利波
环境噪声级
计算机科学
反射计
光纤
信号处理
电子工程
光缆
结构健康监测
同轴混合光纤
纤维
信噪比(成像)
作者
Wang Yuhan,Adonis Bogris,Christos Simos,Hercules Simos,Νikolaos S. Melis,Stavros Deligiannidis,Andreas Fichtner
摘要
Microwave-frequency fiber interferometry (MFFI) is an implementation of integrated fiber-optic sensing (IFOS) that uses existing telecommunication cables to measure strain integrated over long distances. As such, it complements distributed acoustic sensing (DAS), which relies on weak Rayleigh backscattering rather than forward-propagating light, and the range for which is therefore typically limited to less than ∼100 km. Compared with DAS, however, MFFI signals remain poorly characterized in terms of signal content and broadband detection capability. To address this, we conducted a short-distance experiment in which a 15.3 km terrestrial–submarine cable on Kefalonia Island, Greece, was simultaneously instrumented with MFFI and DAS for two months in 2024. The aim of this study is to calibrate MFFI signals quantitatively against collocated DAS observations, thereby preparing the ground for future long-range deployments beyond the reach of DAS. We derive and experimentally verify a conversion model showing that MFFI signals can be approximated by the spatial mean of collocated DAS signals. Using this calibration, we characterize MFFI sensitivity across three frequency–source regimes: (1) in the ocean-wave band (0.1–0.4 Hz), MFFI amplitudes correlate with significant wave height; (2) in the earthquake band (1–12 Hz), waveform-coherence-based manual inspection resolves events down to ML≈1.7 at ∼13 km from the cable center; and (3) localized vehicle signals (1–12 Hz, affecting only short cable segments rather than the whole fiber) remain resolvable in the integrated record. What limits detection is therefore not instrument noise but an unresolved environmental background: roadside traffic and ocean-wave signals superpose along the whole cable and, unlike in DAS, cannot be separated spatially. Even so, MFFI recovers seismic phase and amplitude information consistent with the spatial DAS mean, supporting its use as a cost-effective broadband strainmeter.
科研通智能强力驱动
Strongly Powered by AbleSci AI