包辛格效应
极限抗拉强度
压缩(物理)
材料科学
张力(地质)
复合材料
产量(工程)
拉伸试验
结构工程
工程类
可塑性
作者
Markus Ring,Winfried Dahl
出处
期刊:Steel research
[Wiley]
日期:1993-10-01
卷期号:64 (10): 522-525
被引量:4
标识
DOI:10.1002/srin.199301565
摘要
High-strength tensile bolts of class 8.8 were produced without final heat treatment. Shank-threaded bolts with shanks larger than 65 mm showed inadmissibly large elongations after being tested in proof-load tensile tests according to DIN-ISO 898-1. The reason could be plastic compression applied during fabrication in combination with tensile stresses during testing (Bauschinger effect). For a better understanding of this phenomenon different types of steel were tested in combined compression-tension tests. It was discovered that plastic compression of 1–1.5 % can lead to a maximum decrease in yield strength of 50%. The mathematical relation between decrease and compression rate can be described by a simple power law. As a consequence bolts of this size need an additional heat treatment. In case of being integrated in some other part of production no additional costs occur. Wholly threaded bolts and shank-threaded bolts with shanks smaller than 65 mm can be used without final heat treatment.
科研通智能强力驱动
Strongly Powered by AbleSci AI