成核
锡
材料科学
极化(电化学)
四方晶系
基质(水族馆)
结晶学
晶体结构
冶金
地质学
化学
海洋学
物理化学
有机化学
摘要
Tin islands electrodeposited from basic cyanide solutions were grown graphoepitaxially on a substrate into which a square wave relief pattern had been reactively ion etched. The [100] axis of each island was normal to the substrate and the [001] axis was parallel to the relief structure in the plane of the substrate. Tin has a body‐centered tetragonal crystal structure. At low cathodic polarizations , the islands nucleated at interior corners of the square wave pattern. Nucleation also occurred at the interior corners for all other electrodeposited metals studied (Cu, Pb, In, Zn). The tin islands grew with a highly faceted and linear morphology elongated in the [001] direction. Postdeposition and in situ observations suggested that the dominant mechanism for crystallographic orientation in the plane of the substrate was the physical confinement of the elongated islands in a single groove. The islands usually did not overgrow a step until they had grown as wide as the groove. This growth sequence suggests that the growing islands pushed away from the adjacent steps. Islands nucleated at random on the surface via a high cathodic polarization pulse and subsequently grown at a lower polarization also possessed a strong degree of graphoepitaxy, thus demonstrating that the graphoepitaxial orientation can be induced after nucleation. Nucleation at interior corners may be helpful in starting the orientation process at an earlier growth stage and in placing the islands on the lower level of the square wave pattern where confinement can take place. This demonstration of graphoepitaxy in an electrocrystallization process broadens the range of potential applications for graphoepitaxy, and new information on the orienting mechanism provides guidance in selecting systems for which graphoepitaxy might be successful.
科研通智能强力驱动
Strongly Powered by AbleSci AI