Designing an ultra-thin and wideband low-frequency absorber based on lumped resistance

Traditional absorbers are mostly limited by their large size and high profile, which renders them unfavorable for practical devices. To solve this problem, we design and test an ultra-thin metamaterial absorber (UTMA). The top layer of the metamaterial absorber is designed as a patterned combination of split ring and metal strips, so that its resonant frequency point is in the target low frequency. Meanwhile, ohmic loss is enhanced by loading lumped resistance in the gap of the meta-surface to improve the absorb efficiency (> 90%) and to expand the working bandwidth (1.24-3.14 GHz). Moreover, the total thickness of the absorber is 9 mm (0.037λwith respect to the lowest operating frequency). The working mechanism of UTMA is analyzed based on the equivalent media theory, surface current and electric field energy distribution. The experimental results are in good agreement with the simulation, which verifies the feasibility of the design. In this work, the metamaterial absorber is designed to meet the target requirements from three performance indexes: low frequency, ultra-thin, and wideband, leading to the prospect of broad applications in the military and civil fields.