铜
铝
欠电位沉积
材料科学
冶金
合金
离子液体
分析化学(期刊)
电化学
电极
化学
循环伏安法
色谱法
生物化学
物理化学
催化作用
作者
T G Satheesh Babu,T. Ramachandran,Amrita Vishwa
摘要
Electrodeposition of Aluminium (Al) and Aluminium - Copper alloys (Al-Cu) were performed on gold electrode from AlCl3-Et3NHCl (2:1 weight ratio) room temperature ionic liquid and the bath containing copper acetylacetonate respectively. Cyclic voltammetric (CV) curves obtained on gold electrode in the copper containing ionic liquid is shown in Fig.1.A. The curve shows three cathodic peaks a, b and c, which correspond to reduction of copper, underpotential deposition of aluminium (UPD) and bulk deposition of aluminium respectively. The detailed studies of the reduction currents of UPD of aluminium and bulk deposition of copper showed that they follow a diffusion controlled mechanism. Al deposit of about 80μm thickness was obtained galvanostatically at 1A/dm 2 and Al-Cu alloy of thickness 30μm was obtained at a constant potential of -2.2V (vs Pt wire reference electrode). Electron microscopic images show that both the deposits were uniform with a slight porous morphology on Al coating and flake like structures on Al-Cu alloy deposit. The average composition of the Al-Cu deposit was determined to be 8 atomic percentage of copper to aluminium using Energy Dispersive Spectroscopy (EDS) and the results were confirmed using ICPAES. The high crystallinity of Al, Al-Cu deposits were determined using X-Ray diffraction(XRD) and that of Al-Cu deposit shown in Fig.1.B.
科研通智能强力驱动
Strongly Powered by AbleSci AI