Accurate Image Domain Noise Insertion in CT Images

Tools to simulate lower dose, noisy computed tomography (CT) images from existing data enable protocol optimization by quantifying the trade-off between patient dose and image quality. Many studies have developed and validated noise insertion techniques; however, most of these tools operate on proprietary projection data which can be difficult to access and can be time consuming when a large number of realizations is needed. In response, this work aims to develop and validate an image domain approach to accurately insert CT noise and simulate low dose scans. In this framework, information from the image is utilized to estimate the variance map and local noise power spectra (NPS). Normally distributed noise is filtered within small patches in the image domain using the inverse Fourier transform of the square root of the estimated local NPS to generate noise with the appropriate spatial correlation. The patches are overlapped and element-wise multiplied by the standard deviation map to produce locally varying, spatially correlated noise. The resulting noise image is scaled based on the relationship between the initial and desired dose and added to the original image. The results demonstrate excellent agreement between traditional projection domain methods and the proposed method, both for simulated and real data sets. This new framework is not intended to replace projection domain methods; rather, it fills a gap in CT noise simulation tools and is an accurate alternative when projection domain methods are not practical, for example, in large scale repeatability or detectability studies.