加速度计
灵敏度(控制系统)
加速度
声学
限制
材料科学
图层(电子)
基质(水族馆)
航程(航空)
光学
振动
计算机科学
光力学
考试(生物学)
钥匙(锁)
航空航天工程
物理
验证质量
正在测试的设备
动态范围
作者
Nathaniel Bawden,Benjamin J. Carey,P P Yeo,Nishta Arora,Leo Sementilli,Víctor M. Valenzuela,Erick Romero,Glen I. Harris,Margaret Wegener,Warwick P. Bowen
摘要
Accelerometers offer motion-sensing capabilities across a wide range of areas, enabling navigational awareness in consumer goods and defense applications, and playing a key role in monitoring and control systems. To date, on-chip accelerometers have largely utilized a single device layer or substrate as a test mass. This constrains the test mass to the dimensions and density of the device layer or substrate, ultimately limiting the sensitivity of the device. We demonstrate an alternative approach, which utilizes a pick-and-place bonding technique to increase the test mass of an on-chip accelerometer. By bonding a high-density platinum sphere to a nanomechanical silicon-nitride trampoline membrane, we achieve a quality factor of 1900 in air with 95-mg test mass, corresponding to a thermomechanical noise-limited acceleration sensitivity of 0.8 $\mathrm{n}g/\sqrt{\mathrm{Hz}}$. We optically probe the device's response to applied accelerations with increasing levels of acoustic and vibration isolation, measuring a peak sensitivity of 5.5 $\mathrm{n}g/\sqrt{\mathrm{Hz}}$ at 117 Hz in air, limited by environmental vibrations. This represents the best peak sensitivity reported using a chip-integrated test mass.
科研通智能强力驱动
Strongly Powered by AbleSci AI