Analytical study on sandwich shells considering partial degree of composite action

This paper is focused on a new structural type - sandwich shell, which includes inner and outer shells connected by hoop connectors to achieve composite action; and a functional layer in the middle. Considering that the hoop connectors are not completely rigid, there will be limited slip between the inner and outer shells, which will lead to partial Degree of Composite Action (DCA). Due to the existence of the hoop connectors and shear lag effect, the stress distribution along the width direction of the shell is uneven, which can be described by effective width. Considering all these factors, this paper first develops an analytical model for sandwich shells with different configurations of connectors; and uses finite element analysis results to verify the analytical model. Next, a parametric study is conducted using the analytical model to study the effects of material strength, the ratio of the thickness of the functional layer to the thickness of the single layer shell, and the ratio of the arc length to the width of the sandwich shell on the effective width. It is found that DCA can significantly affect the stress and strain distributions of the sandwich shell. The effective width for 100% DCA can be used as a conservative value to represent those of other DCAs. Finally, a simplified calculation formula, which can be used in practical design, is derived based on the effective width for 100% DCA.