材料科学
硫系化合物
热电效应
热电材料
功勋
硒化物
塞贝克系数
电子迁移率
热电发电机
热的
有效质量(弹簧-质量系统)
半导体
电阻率和电导率
光电子学
功率因数
碲化铋
碲化物
分析化学(期刊)
载流子
共价键
凝聚态物理
硫系玻璃
热导率
作者
Yi Niu,P. Luo,Hailong Sun,Jie Song,Xinrui He,Chao Wang,Jing Jiang
标识
DOI:10.1021/acsami.5c14459
摘要
Cu2Te-based compounds are expected to exhibit superior thermoelectric performance compared to Cu2S and Cu2Se due to the larger atomic mass and more covalent bonding of Te atoms, such as chalcogenide selenide and chalcogenide lead. However, the currently reported figure of merit (ZT) for Cu2Te is still lower than that of Cu2S and Cu2Se. In this work, the thermoelectric transport properties are studied and optimized by two-step coalloying of Cu2Te-based materials. An improved average power factor of 7.21 μW cm-1 K-2 is obtained between room temperature and 773 K because of the largely optimized carrier concentration and Seebeck coefficient. Additionally, the total thermal conductivity decreases to 0.55 W m-1 K-1 for Ag0.7Cu1.3Te0.94S0.06 W m-1 K-1 at room temperature, and the lowest thermal conductivity of 0.49 W m-1 K-1 is obtained in Ag0.7Cu1.3Te0.92S0.08 at 523 K because of the tuned carrier concentration and increased entropy. Combined with the simultaneous optimization of electrical transport properties and thermal transport properties, (Ag, S) coalloyed Cu2Te shows a maximum ZT of 1.4 at 773 K, which is 460% higher than that of Cu2Te at the corresponding temperature.
科研通智能强力驱动
Strongly Powered by AbleSci AI