固化(化学)
氮气
材料科学
复合材料
蒸馏水
显著性差异
葡萄酒
傅里叶变换红外光谱
色差
化学
化学工程
数学
食品科学
色谱法
有机化学
统计
滤波器(信号处理)
工程类
计算机科学
计算机视觉
作者
Bohyun Lim,Dohyun Kim,Je Seon Song,Sunil Kim,Hoon Kim,Yooseok Shin
标识
DOI:10.20944/preprints202401.0434.v1
摘要
Mechanical properties of three-dimensional (3D) printed resin can be improved by decreasing oxygen concentrations during post-curing, and nitrogen saturated post-curing has been applied for the purpose. This study aimed to evaluate and compare the color stability of 3D printed resin crowns post-cured in normal air and nitrogen saturated conditions. Crowns were fabricated with 3D printer and post-cured in normal air (control group; air) or nitrogen saturated condition (experimental group; nitrogen). The specimens in each group were subdivided into four subgroups, each exposed to different discoloration agents: distilled water, coffee, wine, and curry. Post-immersion color changes were measured using a digital spectrophotometer and analyzed through repeated measures ANOVA. Fourier Transform Infrared (FT-IR) spectroscopy evaluated the degree of conversion of resin over immersion times for both post-curing conditions. Comparing the effects of post-curing conditions, significant difference was found between control and experimental groups over immersion time in wine and curry subgroups. In FT-IR analysis, there was significant difference in degree of conversion between the air and nitrogen groups from 10 to 300 seconds. The findings suggest that nitrogen saturated post-curing can potentially enhances the conversion rate of 3D printed resin crowns, thereby improving their color stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI