材料科学
氧化物
纳米技术
粘附
导电原子力显微镜
化学物理
纳米尺度
电介质
表面电荷
化学工程
光电子学
复合材料
化学
原子力显微镜
物理化学
工程类
冶金
作者
Alok Ranjan,Andrea Padovani,Behnood Dianat,Nagarajan Raghavan,K. L. Pey,S. J. O’Shea
标识
DOI:10.1021/acsaelm.3c00903
摘要
We introduce a method combining adhesion and conductivity measurements using conduction atomic force microscopy (AFM) to infer the localized surface redox reactions and charge generation resulting from defects created during the electrical stressing of a thin oxide film. The method is demonstrated on a 3.3 nm thick SiO2, which is stressed by applying voltage to the AFM tip until soft dielectric breakdown (SBD) occurs, with the localized current-voltage characteristics and the tip-surface adhesion forces measured before and after the SBD event. The results show that under SBD, the field-driven diffusion of oxygen ions to the AFM tip leads to greatly enhanced adhesion because the oxygen reaching the surface forms strong chemical bonds with the tip material via oxidation. The electrical stressing also generates charged oxygen vacancy defects, and these are observed as an enhanced adhesion arising from image charge forces. The data presented can be corroborated to the physics of dielectric breakdown in transistor gate materials and conductive filament formation in memristor devices and could be extended to other technologies involving diffusion and surface reactivity of oxygen, e.g., solid oxide fuel cells and catalytic supports.
科研通智能强力驱动
Strongly Powered by AbleSci AI