Effective degradation of recalcitrant naphthenic acids by the Fe(III)/peroxymonosulfate oxidation enhanced by molybdenum disulfide: Degradation performance and mechanisms

In this study, molybdenum disulfide (MoS2) has been investigated as a catalyst to boost the redox cycle of Fe(III)/Fe(II) to activate peroxymonosulfate (PMS) to effectively break down cyclohexanecarboxylic acid (CHA), which is a model naphthenic acid (NA) pollutant. The optimum conditions of pH 3, MoS2 concentration of 0.4 g/L, Fe(III) concentration of 0.3 mmol/L, and PMS concentration of 2 mmol/L has been applied for complete degradation of 0.1 mmol/L CHA in 10 minutes reaction time. Based on results of electron paramagnetic resonance analysis, chemical probe and quenching experiment, it was found that all of •OH, SO4•−, 1O2, and Fe(IV) contributed to the MoS2/Fe(III)/PMS oxidation system. Eighteen CHA byproducts and three primary CHA degradation pathways were revealed according to the results of UHPLC-QTOF-MS analysis. By using XPS, SEM, and XRD to characterize the MoS2 powders before and after the reaction, MoS2 was found with high stability and the oxidation of Mo(IV) on the surface was negligible. The impacts of background anions on CHA degradation were found to be nonimportant, and commercial NAs mixture were verified to be efficiently degraded in current system. Overall results indicate the capacity and potential of MoS2/Fe(III)/PMS system to be utilized for future treatment of authentic oil and gas field wastewater.