Boosting WO3‐Based Electrochromic Performance for Practical Smart Windows: Balancing Charge Density and Matching Color Based on Mn2+/MnO2 Counter‐Electrode Reaction

Abstract Tungsten trioxide (WO3)‐based electrochromic devices (ECDs) often struggle to match suitable counter‐electrode materials due to their characteristic of high charge density and bluish hue. Herein, a new strategy is reported to meet the required charge density and color by introducing an interconversion between solution‐phase Mn2+ and film‐phase MnO2 as the counter‐electrode reaction in WO3 ECDs, and completing the full process from design and optimization to fabricating a practical smart window prototype. By optimizing the harmful byproduct Mn3+ in electrolytes with varying pH values, the typical ECD achieves overall modulation over 70% across the full visible spectrum, retains >90% modulation after 12 h, and maintains excellent stability after 10 000 cycles. Additionally, by gelling the electrolyte, the ECD retains ≈80% modulation retention after 4 h of power‐off at 80 °C. This approach also enables the smart window prototype to nearly block all solar radiation, reducing indoor temperature by over 40 °C, and enhancing waste heat recovery. Simulation results suggest that this smart window can significantly reduce building energy consumption in tropical and subtropical regions, offering promising application potential.