流延
材料科学
复合材料
多孔性
流变学
泥浆
电动现象
烧结
粘度
铸造
纳米技术
作者
M. Blanes,Radostin S. Pavlov,F. Ramos Pérez,Francisco Albero
摘要
[1] B. Bitterlich, C. Lutz, A. Roosen, “Rheological characterization of water-based slurries for the tape casting process”, Ceramics International 28 (2002) 675-683. [2] Encyclopiedia of Surface and Colloid Science, Hiroyuki Ohshima, Electrokinetic Behaviour of particles: Theory, 302-322. [3] Richard E. Mistler, “ Tape Casting Theory and practice”, The American Society, 2000. CONCLUSIONS § Good interaction between solid and dispersing agent was achieved leading to a maximum solid loading in the suspension. § The rheological properties of the slurry have been adjusted in order to obtain a dense and free-crack green tape. § A heat treatment process was established and a planar electrolyte was obtained with less than 0,05% surface porosity. § Thermal treatment affect more on the surface porosity than in the volume porosity. Ytterbium ScandiaStabilized Zirconia (YbScSZ) suspensions were optimized using zeta-potential and viscosity measurements. Maximum packing density is desired. The substrates were obtained by tape casting. The single cell was obtained by warm-pressed lamination of the green tapes. The sintering process was studied using a high-temperature microscope. ABSTRACT FRANCISCO ALBERO S.A.U
科研通智能强力驱动
Strongly Powered by AbleSci AI