分类
遗传算法
涡轮叶片
进化算法
趋同(经济学)
多目标优化
涡轮机
数学优化
刀(考古)
最优化问题
力矩(物理)
弯矩
计算机科学
工程类
数学
结构工程
算法
机械工程
物理
经济
经济增长
经典力学
作者
Matias Sessarego,Kristian Dixon,David E. Rival,David H. Wood
标识
DOI:10.1080/0305215x.2014.941532
摘要
A concurrent-hybrid non-dominated sorting genetic algorithm (hybrid NSGA-II) has been developed and applied to the simultaneous optimization of the annual energy production, flapwise root-bending moment and mass of the NREL 5 MW wind-turbine blade. By hybridizing a multi-objective evolutionary algorithm (MOEA) with gradient-based local search, it is believed that the optimal set of blade designs could be achieved in lower computational cost than for a conventional MOEA. To measure the convergence between the hybrid and non-hybrid NSGA-II on a wind-turbine blade optimization problem, a computationally intensive case was performed using the non-hybrid NSGA-II. From this particular case, a three-dimensional surface representing the optimal trade-off between the annual energy production, flapwise root-bending moment and blade mass was achieved. The inclusion of local gradients in the blade optimization, however, shows no improvement in the convergence for this three-objective problem.
科研通智能强力驱动
Strongly Powered by AbleSci AI