化学
维里系数
渗透压计
特性粘度
扩散
粘度
热力学
聚合物
分析化学(期刊)
色谱法
有机化学
物理
作者
Robert L. Cleland,John L. Wang
出处
期刊:Biopolymers
[Wiley]
日期:1970-07-01
卷期号:9 (7): 799-810
被引量:140
标识
DOI:10.1002/bip.1970.360090706
摘要
Abstract Molecular weights by osmometry ( M̄ n ), light scattering ( M̄ w ), and sedimentation‐diffusion ( M sD ) were determined for selected fractions and unfractionated samples of hyaluronic acid in the molecular weight range 3 × 10 4 −1.7 × 10 6 . For the determination of M sD from the sedimentation coefficient s , a calibration procedure based on the data of Laurent, Ryan, and Pietruszkiewicz gave the following relations in 0.2 M NaCl: log ( s −1 ) 0 = 14.681 − 0.413 log M sD and log D 0 = −3.828 − 0.568 log M sD , where subscript, zero refers to zero concentration and D is the diffusion coefficient. The average Mandelkern‐Flory parameter β in 0.2 M NaCl is 3.0 × 10 6 . Data for the intrinsic viscosity [η] may be fitted for M > 10 5 by [η] = K ′ M a , where K ′, a are in 0.2 M NaCl, 0.0228, 0.816; in 0.5 M NaCl, 0.0318, 0.777; in 0.1 M HCl, 0.0279, 0.763, respectively. Below M = 10 5 , [η] appears to fall below the values calculated, possibly due to non‐Gaussian behavior of short chains. The second virial coefficient A 2 in 0.5 M NaCl approaches the ideal Donnan value, decreasing slightly with increasing molecular weight. The friction parameter P is about 20% smaller than that of uncharged polymers of similar dimensions. The flexible coiling nature of this polymer is confirmed.
科研通智能强力驱动
Strongly Powered by AbleSci AI