Investigation of electrocatalytic and photocatalytic ability of Cu/Ni/TiO2/MWCNTs Nanocomposites for detection and degradation of antibiotic drug Furaltadone

Abstract In this manuscript, “Get two mangoes with one stone” strategy was used to study the electrochemical detection and photocatalytic mineralization of furaltadone (FLT) drug using Cu/Ni/TiO 2 /MWCNTs nanocomposites for the first time. The bi-functional nanocomposites were synthesized through a hydrothermal synthesis technique. The successfully synthesized nanocomposites were analyzed by various analytical techniques. The Cu/Ni/TiO 2 /MWCNTs nanocomposites decorated screen-printed carbon electrode (SPCE) exhibit a good electrocatalytic ability towards detection of FLT. Moreover, the electrocatalytic detection of FLT based on the nanocomposites decorated SPCE have high stability, lower detection limit, and excellent sensitivity of 0.0949 μM and 1.9288 μA μM −1 cm −2 , respectively. In addition, the nanocomposites decorated SPCE electrodes performed in real samples, such as river water and tap water, the satisfactory results were observed. As UV–Visible spectroscopy revealed that the Cu/Ni/TiO 2 /MWCNTs nanocomposites had an excellent photocatalytic ability for degradation of FLT drug. The higher degradation efficiency of 75% was achieved within 45 min under irradiation of visible light. In addition, after the degradation process various intermediates are produced which is confirmed by GC–MS analysis. The excellent photocatalytic ability was improved to the dopant ions and restrictions of electron–hole pair.