材料科学
碳化硅
光电子学
光源
硅
碳化物
光学
混合硅激光器
工程物理
可见光谱
作者
Leimin LIU,Hongxin LUO,Yi He,Limin JIN,Yongjie Li,Jingwen LIU,Yuquan WEI,Anle SUN,Zhongming Chen,Xuejian LIU,Jie Yin,Zhengren HUANG
出处
期刊:Journal of Inorganic Materials
[Science Press]
日期:2025-11-11
卷期号:41 (6): 805-805
被引量:1
摘要
The rapid development of advanced light source technologies, such as synchrotron radiation and X-ray free electron lasers, especially for high-energy and high-brightness X-ray facilities, has become one of the key factors restricting the further improvement of beamline performance.When high-energy beams are irradiated onto the surface of mirrors, the absorption of such energy can cause radiation damage and thermal deformation of the mirrors.This study provides an indepth exploration of various aspects, including the structural design of mirrors, material selection, performance simulation, prototype fabrication, optical processing, and performance testing.By combining solid-state sintering with precision optical processing technology, a silicon carbide (SiC) planar mirror with high optical property was developed.The influence of different materials on the thermal deformation of the reflective mirror surface, as well as the impact of surface shape accuracy and roughness control on the optical surface quality of the reflective mirror was discussed.The research shows that under an absorbed power of 200 W, the modified SiC mirror exhibits approximately 22% reduction in normal deformation along the meridional direction compared to conventional single-crystal silicon mirrors.After optical processing, the PV value of its mirror surface reached 24.3 nm, the RMS value reached 1.7 nm, the surface roughness RMS reached 0.168 nm,
科研通智能强力驱动
Strongly Powered by AbleSci AI