Enhancing cutting performance of Ti(C,N)‐based cermet tools on nodular cast iron by incorporating high‐entropy carbide

Abstract In this study, we investigated the cutting performance and wear mechanisms of Ti(C,N)‐based cutting tools containing varying weight percentages (0%, 5%, 10%, and 15%) of high‐entropy carbide (HEC) (V 0.2 Nb 0.2 Mo 0.2 Ta 0.2 W 0.2 )C phase, when used for turning nodular cast iron. According to the turning test results, the cermet cutting tools containing 0 wt%, 5 wt%, 10 wt%, and 15 wt% HEC phases demonstrated effective cutting lives of 402, 720, 632, and 465 s, respectively. The tool with 5 wt% HEC phase showed the best cutting performance. When cutting nodular cast iron with cermet cutting tools, the main wear mechanisms observed were diffusion, oxidation, adhesion, and abrasion on the flank surface, along with diffusion, oxidation, and abrasion on the rake surface. The results of this study indicated that (V 0.2 Nb 0.2 Mo 0.2 Ta 0.2 W 0.2 )C could be adopted as an effective reinforced phase in the cermet cutting tools.