结晶
碳酸钙
铜
钙
涂层
化学工程
碳酸盐
缩放比例
材料科学
化学
冶金
纳米技术
数学
工程类
几何学
作者
Junliang Xiao,Yimin Luo,Qianqian Yao,Jinyu Wu,Shu‐Shen Lyu,Zhuangzhu Luo
标识
DOI:10.1016/j.surfcoat.2024.131056
摘要
To address the technical bottleneck of synergistic damage caused by corrosion and scaling after damage to protective coatings on heat exchangers, petrochemical pipelines, and seawater desalination equipment, the surface scaling amount and calcium carbonate crystal morphology of ZF anti-corrosion polymer coating (WCA = 95°) and ZQ self-cleaning coating (WCA = 120°, WSA = 14°) are compared in a scaling system involving metal ions (Fe2+) generated by corrosion. The anti-scaling effect of the ZQ coating (34.6 %) with ions is 61.7 % higher than that of the ZF coating (21.4 %). As the concentration of Fe2+ increases, the aragonite on the ZQ coating transform from needle shaped crystals to cactus shaped crystals (expressed as C-CaCO3) with their whisker length about 20 μm. Furthermore, Cu2+ is introduced into the system by galvanic corrosion between steel and copper. The crystals on the ZQ coating are honeycomb shaped calcite, which transform to C-CaCO3 with shorter whisker length about 10 μm as the contacting area of steel/copper galvanic couple increases. The C-CaCO3 reduces the adhesive area of crystals on the surface of self-cleaning coatings with low surface energy, making it easier to be removed in dynamic scaling environment. Therefore, a self-cleaning coating on copper for inhibiting CaCO3 crystallization and scaling was prepared, hoping to provide a new method for the crystallization of multiple ions on the surface of self-cleaning coatings in the field of engineering scale prevention.
科研通智能强力驱动
Strongly Powered by AbleSci AI