偷看
方位(导航)
推力轴承
材料科学
推力
复合材料
冶金
岩土工程
法律工程学
地质学
工程类
机械工程
计算机科学
聚合物
人工智能
作者
Sasuga Machino,S. Shinkai,Takahiro Matsueda,Koshiro Mizobe,Katsuyuki Kida
标识
DOI:10.1088/1742-6596/2845/1/012007
摘要
Rolling bearings are important mechanical elements for machines. Poly-ether-ether-ketone (PEEK) polymer is a suitable material for bearings in water and corrosive conditions because of its excellent water and chemical resistance. Some study had been examining rolling contact fatigue (RCF) tests in water; however, the competition between cracks propagation and wear on the surface of PEEK bearing in water was not clear. In the present study, in order to evaluate the crack propagation and wear process, RCF test with PEEK thrust bearings at 3750 [N] in water was carried out. The lengths of the surface cracks and the profiles of the grooves were observed at different number of cycles. In addition, so as to identify the cracks which cause the flaking, start-stop test was carried out. We found the surface crack, which was initially observed at 4.62×10 5 cycles, were gradually worn down and completely disappeared at 6.32×10 5 cycles. We concluded that rolling contact fatigue caused some surface cracks of PEEK to wear down in water condition.
科研通智能强力驱动
Strongly Powered by AbleSci AI