Synthesis, characterization, and dielectric studies of magnetic iron oxide nanoparticles

There are many nanoparticle preparation techniques such as the biological approach sol-gel method and physical methods, etc. However, the co-precipitation approach requires few chemical reagents and reaction time as well as produces highly pure products with comparatively lower costs among the available techniques. In present work co-precipitation method is use to synthesize magnetic iron oxide (Fe3O4) nanoparticles, followed by characterization to check its applicability and the presence of undesired substrate. UV–visible spectroscopy, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Fourier-Transform Infrared Spectroscopy (FTIR) were examined to determine the synthesized Fe3O4 nanoparticles. The nanoparticles’ sizes lies between 1 nm to 100 nm, according to the SEM and HR-TEM analyses. XRD measurements verified the crystalline characteristics of the Fe3O4 nanoparticles. Dielectric spectroscopy of synthesized Fe3O4 nanoparticle pellets has been investigated at a wide frequency range 0.1 to 105 Hz. Capacitance and dielectric permittivity of Fe3O4 nanoparticles decrease continuously with frequency as dipole gets less time to orient in the field. The dielectric permittivity of Fe3O4 pellets increases up to 3 mm thickness and subsequently drops, perhaps because a rise in resistance. The electrical conductivity of Fe3O4 rises exponentially with frequency. According to the dielectric studies, the dielectric permittivity and electrical conductivity of Fe3O4 are greatly dependent on the thickness and extent of frequency. Additionally, the dielectric impedance of Fe3O4 pellets has also been investigated as a function of frequency.