Achieving ultrahigh power factor in Mg 3(Sb,Bi) 2-based thermoelectric alloys sintered by introducing elemental Mg and W

Improving the power factor (PF) of thermoelectric materials is crucial for enhancing output power density and broadening practical applications. The near-room-temperature electrical performance of Mg₃(Sb,Bi)₂-based alloys is hindered due to the presence of Mg vacancies and grain boundary scattering, resulting in lower power factor. Herein, we introduced an excess of Mg into the Mg₃(Sb,Bi)₂ alloy during the hot-pressing process, triggering a liquid phase sintering process, which can effectively fill the Mg vacancies and increase the average grain size to significantly reduce grain boundary scattering. This leads to enhanced room-temperature electrical conductivity (σ) without detrimental effects on the Seebeck coefficient (S), thus yielding a high average PF of ~25.3 μW cm^-1 K^-2 and an average figure of merit (ZT) of ~ 1.03 within the temperature range of 323‒623 K. Moreover, different amounts of W were further added, and density-functional theory (DFT) calculations reveal that W segregation at grain boundaries reduces interfacial potential barriers, leading to an improved S and σ. Consequently, an ultrahigh average PF of ~26.2 μW cm^-1 K^-2 was attained in the W_0.06Mg_3.2Sb_1.5Bi_0.49Te_0.01–4%Mg alloys. Additionally, the mechanical properties (Vickers hardness and fracture toughness) were also enhanced compared with the pristine Mg₃(Sb,Bi)₂ alloy. This dual-modified approach can significantly boost the TE performance and mechanical stability, advancing Mg₃(Sb,Bi)₂-based materials for practical applications.