结构工程
有限元法
刚度
耐撞性
梁(结构)
材料科学
扭转(腹足类)
还原(数学)
窗台
复合数
帧(网络)
逐渐变细
计算机科学
优化设计
撞车
钢筋
复合材料
刚架
汽车工程
工程类
碳纤维增强聚合物
机械工程
扭力弹簧
材料性能
多目标优化
电动汽车
作者
Yunlong Ma,Ruiliang Xu,Liyou Xu,Shuai Zhang,Feng Xiong,Xuan Jia,Zengyuan Guo
标识
DOI:10.1139/tcsme-2026-0003
摘要
This paper proposes a hybrid material sill beam structure combining high-strength steel outer panels with carbon fiber reinforced plastics (CFRP) reinforcement plates to enhance the stiffness of the vehicle underbody. Through multi-objective optimization, the crashworthiness and lightweight performance of the underbody ring frame are improved. First, a finite element model for the white body and full vehicle of an electric vehicle is established for frontal impact testing, with model accuracy verified through experiments. A multi-level optimization approach for CFRP sill beam reinforcement plates based on T700/WP-R2300 composite material is proposed, encompassing free-dimension optimization, dimensional optimization, and layup sequence optimization. The optimized sill beam assembly is integrated with components such as the A-pillar and torsion box to form the lower body frame ring. A multi-objective optimization model based on the NSGA-II algorithm was established to optimize component thicknesses. The TOPSIS method was employed to obtain the optimal ranking of the Pareto solution set. Optimization results demonstrate that the optimized design achieves a 29.2% weight reduction in both side lower sill beams and a 10.73% weight reduction in the lower body frame ring. Concurrently, acceleration at the right B-pillar decreased by 6.67%, along with a 4.53% reduction in intrusion at the junction between the right lower A-pillar and lower sill beam. Significant lightweighting objectives were achieved while maintaining the frontal crash performance of both the body-in-white and the complete vehicle.
科研通智能强力驱动
Strongly Powered by AbleSci AI