材料科学
超级电容器
电解质
电容
抗压强度
分离器(采油)
多孔性
循环伏安法
电化学
复合材料
化学工程
聚合物
杨氏模量
氢氧化钠
模数
电极
弹性模量
激活剂(遗传学)
双功能
计时安培法
作者
Zhen Zhao,Dan Meng,Xuemin Wu,Longhao Gu,之恒 徐
标识
DOI:10.1680/jadcr.26.00101
摘要
This study reports a bifunctional structural supercapacitor incorporating a metakaolin-based geopolymer as a mechanically robust electrolyte separator and activated carbon as the electrode material. Geopolymer separators were prepared using a mixed sodium hydroxide (NaOH)–sodium metasilicate (Na2SiO3) activator with different activator modulus values (Ms), and their pore structure, mechanical properties and electrochemical performance were systematically investigated. Increasing Ms from 0.6 to 1.4 reduced the accessible porosity to approximately 40% and refined the most probable pore size from about 430 nm to 120–150 nm, indicating the formation of a denser and narrower multiscale pore network. This refinement enhanced the 28-day compressive strength, which reached 15.3 MPa at Ms = 1.4. All assembled symmetric structural supercapacitors with sodium sulfate (Na2SO4) electrolyte exhibited nearly rectangular cyclic voltammetry (CV) curves and quasi-linear galvanostatic charge–discharge (GCD) profiles, confirming electric double-layer capacitive behaviour. The device with Ms = 0.6 delivered the highest areal capacitance of 232.51 mF/cm2, whereas Ms = 1.2 achieved a favourable balance between mechanical and electrochemical performance, with a compressive strength of approximately 12.5 MPa and an areal capacitance of 191.68 mF/cm2. These results demonstrate that activator modulus regulates mechanical–electrochemical coupling by tailoring geopolymer pore structure.
科研通智能强力驱动
Strongly Powered by AbleSci AI