Study curing of epoxy resin by Isophoronediamine/ Triethylenetetramine and reinforced with montmorillonite and effect on compressive strength

Abstract Epoxy is a widely used thermosetting resin recognized for its exceptional performance in adhesives, coatings, and various other applications, attributed to its high tensile strength, stiffness, electrical performance, and chemical resistance. Epoxy-clay nanocomposites are extensively employed across diverse industries. The physical and chemical properties of these nanocomposites are influenced by the processing methods, clay modifiers, and curing agents used during their preparation. In this study, epoxy/nanoclay composites based on Diglycidyl Ether Bisphenol-A (DGEBA) will be cross-linked using Isophorone Diamine (IPD), a cycloaliphatic amine, and Triethylenetetramine (TETA), a linear aliphatic amine. The initial phase of the research will assess the impact of different types of cross-linkers, both individually and in combination at various molar ratios (such as Isophorone Diamine: Triethylenetetramine (IPA: TETA) / 25:75 and 75:25), on the compressive strength of the epoxy mortar. In the subsequent phase, the epoxy formulation with an Isophorone Diamine: Triethylenetetramine (IPD: TETA / 75:25), which demonstrates the highest compressive strength, will be selected for further investigation. This formulation will be used to evaluate the effects of different weight percentages (3%, 5%, and 7%) of organically modified montmorillonite (OMMT). The prepared epoxy composites will be characterized using a range of techniques, including Fourier Transform Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), and Scanning Electron Microscopy (SEM). The epoxy/nanoclay composite with an IPD: TETA / 75:25 and 3 wt % OMMT is expected to show the highest compressive strength, which is 94 MPa.