键裂
催化作用
劈理(地质)
化学
立体化学
材料科学
有机化学
复合材料
断裂(地质)
作者
Tao Zhang,Jingqing Tian,Ye‐Feng Yao,Bing Ma,Wei Zhang,Yue Liu,Chen Zhao
标识
DOI:10.1021/acs.jpcc.4c02721
摘要
WO 3 has been reported to be active in selectively cleaving the C–C bonds of glucose. A frequently occurred problem with this catalytic reaction is low activity and poor cycling performance caused by the in situ-generated hydro tungsten bronze (e.g., H 0.23 WO 3 ) which seriously leaches in hot water. In this work, we prepared intrinsically oxygen-deficient W 20 O 58 by the reduction of WO 3 in H 2 . It had a higher robustness during the reaction of glucose that no phase change was observed from XRD patterns and the yields of ethylene glycol and propylene glycol remained stable over five recycling runs. In comparison to the conventional WO 3 catalyst which lost 27% after five cycles, the loss of W 20 O 58 after the same treatment was only 7%. The high-temperature hydrogen treatment turned WO 3 into W 20 O 58 . Lattice distortion of tungsten–oxygen octahedra caused the formation of abundant oxygen vacancies in W 20 O 58, which largely precluded the adsorption of hydrogen and the formation of hydro tungsten bronze. Besides higher stability, W 20 O 58 also showed higher catalytic activity to cleave C–C bonds in glucose than H 0.23 WO 3 . In situ IR, solid-state UV, EPR, and Raman characterizations demonstrated that substantial oxygen vacancies on the surface of W 20 O 58 favored the binding with C=O group in glucose and promoted the cleavage of the C–C bond at the beta-position to the C=O group.
科研通智能强力驱动
Strongly Powered by AbleSci AI