残余物
岩石力学
岩体分类
能量(信号处理)
材料科学
索引(排版)
弹性能
岩土工程
地质学
结构工程
数学
统计
工程类
物理
计算机科学
算法
万维网
量子力学
作者
Song Jiao Luo,Fengqiang Gong,Kang Peng,Zhixiang Liu
标识
DOI:10.1016/j.jrmge.2023.09.003
摘要
Accurate prediction of rockburst proneness is one of challenges for assessing the rockburst risk and selecting effective control measures. This study aims to assess rockburst proneness by considering the energy characteristics and qualitative information during rock failure. Several representative rock types in cylindrical and cuboidal sample shapes were tested under uniaxial compression conditions and the failure progress was detected by a high-speed camera. The far-field ejection mass ratio (FEMR) was determined considering the qualitative failure information of the rock samples. The peak-strength energy impact index and the residual elastic energy index were used to quantitatively evaluate the rockburst proneness of both cylindrical and cuboidal samples. Further, the performance of these two indices was analyzed by comparing their estimates with the FEMR. The results show that the accuracy of the residual elastic energy index is significantly higher than that of the peak-strength energy impact index. The residual elastic energy index and the FEMR are in good agreement for both cylindrical and cuboidal rock materials. This is because these two indices can essentially reflect the common energy release mechanism characterized by the mass, ejection velocity, and ejection distance of rock fragments. It suggests that both the FEMR and the residual elastic energy index can be used to accurately measure the rockburst proneness of cylindrical and cuboidal samples based on uniaxial compression test. ©2023 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
科研通智能强力驱动
Strongly Powered by AbleSci AI