Ageing behaviour and molecular/network structure evolution of EPDM/carbon black composites under compression and in thermal-oxidative environments

EPDM/carbon black (CB) composites were first prepared using sulfur as vulcanizing system, and the mechanical properties of EPDM/CB composites gradually increased with increasing CB content. Compressive stress-thermo oxidative ageing was performed in terms of three compressive stress levels and temperature conditions. During ageing process, two typical reactions of chains scission and crosslinking were deduced. On the one hand, degradation reaction of EPDM molecules occurred and unstable free radicals were produced under thermo/stress effect, which were oxidized to generate oxygenated compounds, leading to the increase of dangling chains ratio and the breakage of CB network with two-phase separation. On the other hand, the active free radicals were further consumed to initiate secondary crosslinking reaction, resulting in increase of crosslinking density and restriction of chains mobility. During the whole ageing process, the crosslinking reaction was dominant over chain scission reaction, resulting in the increase of crosslinking density and poor uniformity of network structure. Consequently, the surface/fractured surface morphologies of aged EPDM showed coarse features with obvious CB aggregates and the rupture of continuous CB network due to interfacial debonding, eventually leading to the remarkable deterioration of mechanical properties and decline of sealing resilience.