摩擦电效应
生物电子学
纳米复合材料
壳聚糖
材料科学
纳米技术
复合材料
化学工程
生物传感器
工程类
作者
Shyju. S,Akash M. Chandran,S. Varun,Manish Kumar,Prasanna Kumar S. Mural
标识
DOI:10.1021/acsaelm.3c01428
摘要
Triboelectric nanogenerators (TENG) based on natural biomaterials are essential for energy-harvesting applications. In this work, an efficient approach was proposed to enhance the electrical performance of chitosan (CS), which is a naturally occurring biopolymer with the incorporation of polyethylenimine-grafted graphene oxide (PEI-GO) nanoparticles. Triboelectric properties of the different weight combinations of PEI-GO in CS were tested against polytetrafluoroethylene (PTFE). An improvement in the mechanical and electrical properties of the nanocomposites was observed in comparison to pure chitosan. Thus, the composite with 10 wt % PEI-GO was used as the positive layer in the TENG device, and an open-circuit voltage (Voc) of ∼222 V, short circuit current (Isc) of ∼6.6 μA, and transfer charge (Qsc) of ∼149.6 nC were observed. Almost a 5.5 fold increase of the output power (∼1465.2 μW) and its power density (∼407 mW/m2) were seen for the nanocomposite in comparison to that of pure CS. The TENG was able to power calculators and wristwatches and light up 126 blue light-emitting diodes (LEDs). Further, a TENG was fabricated with the same polymer (CS and CS nanocomposite) as tribo-layers, where the pure CS polymer acts as the tribo-negative layer and PEI-GO-incorporated CS acts as the tribo-positive layer in the CS polymer-based TENG. The device was found to light up 14 white LEDs with the human hand tapping. This study thus presents opportunities for utilizing biomechanical energy found in everyday life to power bioelectronics with bioderived materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI