莫来石
刚玉
材料科学
高岭石
陶瓷
复合材料
造型(装饰)
原材料
冶金
矿物学
地质学
化学
有机化学
作者
Erna Tutić,M. Jovanović,Adnan Mujkanović
出处
期刊:Science of Sintering
[International Institute for the Science of Sintering, Beograd]
日期:2016-01-01
卷期号:48 (2): 247-257
被引量:10
摘要
In this paper are investigated microstructural, phase, physical and\n mechanical properties of mullite ceramics obtained from clay and Bayer\n electrofilter fines. Clay and alumina were mixed in such ratio that provides\n the amount of AlO23 and SiO2 corresponding composition of mullite. One\n mixture was manually mixed and other was milled three hours in ceramic mill.\n After isostatic molding and heat treating at 1580°C and 1635°C XRD analysis\n revealed approximately 60% of mullite and 40% of corundum in first mixture\n and in second mixture 70% of mullite and 30% of corundum. Two types of\n mullite were observed in SEM micrographs beside corundum grains and glassy\n phase. The results of investigation indicate that preparation of mullite\n ceramics from these raw materials is possible, if clay and alumina are well\n homogenized and milled before molding.
科研通智能强力驱动
Strongly Powered by AbleSci AI