Hot isostatic pressing '93 : proceedings of the International Conference on Hot Isostatic Pressing--HIP '93, Antwerp, Belgium, 21-23 April, 1993

Part 1 Fundamentals: Experimental and theoretical modelling of the isostatic pressing of composite powders (C.D. Turner, M.F. Ashby). Simulation of powder consolidation (R.M. McMeeking, J. Xu). Finite element analysis of cold- and hot-isostatic pressing (R.M.Govindarajan, N. Aravas). Hot triaxial compaction: the effect of shear stress on the Al powder compact densification process (S. Watatani, H.R. Piehler, D.M. Watkins). Macroscopic simulation of consolidation during hot isostatic pressing (E.A. Olevsky, M.B. Shtern, V.V. Skorohod). Part 2 Intermetallics and Castings: Hot isostatic pressing of titanium based materials (F.H. Froes, J. Hebeisen). HIP-synthesis of gamma-base titanium-aluminide composites (F. Pirwitz et al). Hot isostatic pressing using the intelligent processing of materials approach (T.E Zahrah et al.). Reactive HIP of NiAl-base intermetallic composites (H.P. Buchkremer et al). Consolidation of Ni-Al based intermetallics by plasma spray forming and hot isostatic pressing (A. Geibel et al.). Regeneration of mechanical properties by HIP (D.J. Stephenson, T.N. Ho, P. Hancock). Part 3 Powder Metallurgy, Surface Engineering, Diffusion Bonding: Industrial application of HIP for near net shape critical parts and components (V.N. Samarov). Manufacture of corrosion and wear resistant composite materials (M. Pierronnet, G. Raisson). Effect of inclusion morphology on the densification of TA6V powder reinforced with TiB2 inclusions (P. Thibault et al). Tailored microstructure and properties through powder metallurgy and hot isostatic pressing (L. Buekenhout). HIP and superplastic fanning of high performance P/M steels (R. Laag et al). HIPing of components with internal cores (L. Bjork, R. Tegman). Structured coatings by HIP: technical and economic benefits (G.F. Archer). Hot isostatic pressing of AA6061 - SiC composites (L. Froyen, L. Delaey, L. Buekenhout). Production of corrosion and wear resistant neutron absorbing materials by the hot isostatic pressing of powders (M. Pierronnet et al). A study of fabrication through powder metallurgy of nickel based superalloys hybrid structural parts (Y. Bienvenu et al). Gas-pressure combustion sintering (SHS/HIP) using silicon fuel (Y. Miyamoto et al.). Surface engineering of twin-screw extruder barrels (G.F. Archer, D.J. Stephenson). The formation of aluminide diffusion coatings on nickel-based materials by hot isostatic pressing (J.R. Blackford et al.). Part 4 Ceramics: Hot isostatic pressing of ceramics - an overview (H.T Larker). Encapsulation HIPing of laser synthesised nanosize silicon carbide (R. Gilissen et al). HIPing of conventional Si3N4 and ultrafine SiC powder mixtures (R. Vassen, D. Stover, H.P. Buchkremer). Silicon nitride materials produced by sinter HIP and hot pressing (H. Klemm, U. Gerlach). Influence of powder processing on the densification behaviour and microstructure of sinter-HIPed silicon nitride (H.-J. Ritzhaupt-Kleissl et al.). (Part contents).