Solid-state FMCW LiDAR with In-fiber Beam Scanner

The beam scanner is a predominant part in the light detection and ranging (LiDAR) system to achieve three-dimensional (3D) imaging. The solid-state beam-steering device has emerged as a promising candidate technology for a beam scanner with the advantages of robustness, stability, and high scanning speed. Here we propose a frequency modulated continuous wave (FMCW) LiDAR system with an in-fiber solid-state beam scanner. A 45° tilted fiber grating (TFG) is first employed to achieve in-fiber solid-state spectral scanning in the LiDAR system. A maximum output efficiency of 93.7% is achieved with proper polarization control. A single-mode fiber is then used to fabricate a 2-cm 45° TFG, which significantly reduces the size and the cost of the beam scanner in the LiDAR system. We experimentally realize 3D imaging of targets placed at a distance of 1.2 m based on our proposed LiDAR system. In addition, the system can achieve a detection distance of 6 m with a ranging precision of 24 mm.