激光线宽
材料科学
光学
光纤布拉格光栅
光纤激光器
激光器
光电子学
拉曼光谱
边坡效率
放大器
激光功率缩放
波长
物理
CMOS芯片
作者
Xin Tian,Chenhui Gao,Chongwei Wang,Xiaofan Zhao,Meng Wang,Xiaoming Xi,Zefeng Wang
出处
期刊:Photonics
[Multidisciplinary Digital Publishing Institute]
日期:2021-11-25
卷期号:8 (12): 532-532
被引量:5
标识
DOI:10.3390/photonics8120532
摘要
We report a high power, narrow linewidth fiber laser based on oscillator one-stage power amplification configuration. A fiber oscillator with a center wavelength of 1080 nm is used as the seed, which is based on a high reflection fiber Bragg grating (FBG) and an output coupling FBG of narrow reflection bandwidth. The amplifier stage adopted counter pumping. By optimizing the seed and amplifier properties, an output laser power of 2276 W was obtained with a slope efficiency of 80.3%, a 3 dB linewidth of 0.54 nm and a signal to Raman ratio of 32 dB, however, the transverse mode instability (TMI) began to occur. For further increasing the laser power, a high-power chirped and tilted FBG (CTFBG) was inserted between the backward combiner and the output passive fiber, experimental results showed that both the threshold of Stimulated Raman scattering (SRS) and TMI increased. The maximum laser power was improved to 2576 W with a signal to Raman ratio of 42 dB, a slope efficiency of 77.1%, and a 3 dB linewidth of 0.87 nm. No TMI was observed and the beam quality factor M2 maintained about 1.6. This work could provide a useful reference for obtaining narrow-linewidth high-power fiber lasers with high signal to Raman ratio.
科研通智能强力驱动
Strongly Powered by AbleSci AI