PAN electrospun nanofiber skeleton induced MOFs continuous distribution in MMMs to boost CO2 capture

Metal organic frameworks (MOFs) based mixed matrix membrane (MMM) for CO 2 capture shows insufficient CO 2 permeability due to random disperse of MOFs in form of individual particle. Therefore, in this work, a continuous MOFs transport pathway for CO 2 with low resistance was constructed in the MMM by assistance of electrospun nanofiber. Specifically, PAN electrospun nanofiber mat (NFM) was utilized as skeleton to obtain continuous ZIF-8 nanofibers. Then flexible polyethylene glycol (PEG) molecules were photo-polymerized in situ into the inner-voids within ZIF-8@PAN NFM to form dense membrane. As a result, ZIF-8 particles are distributed in PEO matrix continuously, leading to a low-resistance transport pathway for gas molecules in MMM, which is proved by the cross-sectional SEM images. Furthermore, the higher Tg of ZIF-8@PAN-x/PEO MMM by DSC also indicates the good interfacial compatibility between ZIF-8 and PEO. Compared with pure PEO membrane, all the ZIF-8@PAN-x/PEO MMMs present both enhanced CO 2 permeability and CO 2 /N 2 selectivity. The enhanced CO 2 permeability is attributed to the continuous ZIF-8 transport pathway, and the improved selectivity is ascribed to the size screening from nanofibers overlapping and stacking and the tortuous transport pathway. Importantly, compared with ZIF-8/PEO MMM, in which ZIF-8 particles are randomly dispersed into PEO matrix, the ZIF-8@PAN-4/PEO MMM with the same ZIF-8 loading of about 16.6 wt% presents enhanced CO 2 permeability and CO 2 /N 2 selectivity, which are increased by 52.4% and 44.3%, respectively. This is due to the continuous ZIF-8 transport pathway and good interfacial compatibility, which is also confirmed by the result of gas diffusivity and solubility coefficients. Together with the outstanding mechanical strength and stability, the proposed MMM with continuous ZIF-8 transport pathway paves a new way to improve CO 2 permeability. • MMM with continuous MOFs pathway was constructed to capture CO 2 . • PAN nanofibers were used to induce MOFs continuous in long-range. • MMM was obtained by in-situ polymerization of PEG within MOFs NFM. • Both high permeability and selectivity were achieved by continuous gas pathway.