材料科学
计时安培法
纳米复合材料
循环伏安法
超级电容器
X射线光电子能谱
水平扫描速率
纳米颗粒
分析化学(期刊)
化学工程
电容
核化学
纳米技术
电极
电化学
化学
物理化学
有机化学
工程类
作者
Saad M. Alshehri,Jahangeer Ahmed,Ameen N. Alhabarah,Tansir Ahamad,Tokeer Ahmad
标识
DOI:10.1002/celc.201700602
摘要
Abstract Nitrogen‐doped CoFe 2 O 4 /C (NCFC) nanocomposites (NCs) with an average size of 10 nm were obtained from the polymeric route, using egg white albumin followed by firing at 700 °C/3 h under the flow of helium gas. Structural and morphological studies of prepared materials were investigated by using powder X‐day diffraction, X‐ray photoelectron spectroscopy, and electron microscopic techniques. NCFC‐NCs exhibit excellent supercapacitive performances compared to pure MFe 2 O 4 nanoparticles (M=Ni, Co, Cu, etc.). The specific capacitance ( C s) of NCFC‐NCs was found to be approximately 474 F/g, which is around five times higher than that of pure CoFe 2 O 4 nanoparticles ( C s=94 F/g) at a scan rate of 5 mV/s in 5 M KOH. The energy densities of NCFC‐NCs and pure CoFe 2 O 4 nanoparticles were found to be about 116 and 23 Wh/kg, respectively. Galvanostatic charge−discharge measurements of NCFC‐NCs reveals the loss of less energy and the discharge time of the nanocomposites was found to be approximately ten times higher compared to pure CoFe 2 O 4 nanoparticles for 50 segments. The stability tests of the materials were also carried out by the cyclic voltammetry, chronoamperometry, and chronopotentiometric measurements for the purpose of industrial applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI