侧链
聚酰亚胺
磺酰
材料科学
二胺
电介质
介电常数
聚合物
高分子化学
玻璃化转变
吊坠组
复合材料
化学工程
有机化学
化学
光电子学
烷基
图层(电子)
工程类
作者
Jinpeng Luo,Hui Tong,Shimo Cao,Junbiao Liu,Xiaomin Li
出处
期刊:IET nanodielectrics
[Institution of Engineering and Technology]
日期:2023-08-09
卷期号:6 (3): 105-115
被引量:6
摘要
Abstract Polymer dielectrics with excellent thermal resistance and superior energy storage behaviour are extensively demanded with the increasing development of film capacitors applied in hostile environments. In this study, novel diamine with sulfonyl‐containing side chain was designed and synthesised. The corresponding polyimide (PI) dielectrics derived from the sulfonyl‐containing diamine were prepared, so were the polyimides possessing the same backbone but without side chains. Consequently, superior thermal resistance of glass transition temperature ranged from 162–208°C was obtained. Moreover, the polyimides presented permittivity of 3.34–5.89 at 1 kHz, Weibull breakdown strength of 377–538 MV/m and discharged energy density of 3.82–5.85 J/cm 3 . In particular, sulfonyl‐containing polyimide of SPI‐2 with flexible backbone and sulfonyl side chain indicates the highest discharged energy density and charge‐discharge efficiency simultaneously. The introduction of the strong polar sulfonyl group in the side chain enhances dielectric and energy storage properties effectively. In addition, it is found that the dipolar moment density (μ/ V vdw ) calculated from molecular simulation is closely correlated to permittivity measured from experiments. The combined method of molecular simulation and experiments would offer an effective approach to assist in molecular design of high‐performance polymer dielectrics.
科研通智能强力驱动
Strongly Powered by AbleSci AI