聚偏氟乙烯
电解质
复合数
炭黑
电极
材料科学
化学工程
氧化物
快离子导体
碳纤维
聚合物
离子电导率
化学
物理化学
冶金
复合材料
工程类
天然橡胶
作者
Ryoichi Tatara,Hosei Suzuki,Mizuki Hamada,Kei Kubota,Shinichi Kumakura,Shinichi Komaba
标识
DOI:10.1021/acs.jpcc.2c06360
摘要
In this study, all-solid-state sodium batteries with dry polymer electrolytes are demonstrated based on Na half-cell optimization for the stable operation of a layered oxide positive electrode, P2-Na2/3[Ni1/3Mn2/3]O2, and a hard carbon negative electrode at 60 °C. In all-solid-state batteries, the dry-polymer electrolyte does not penetrate the pores of the composite electrode; thus, dispersibility of the active material, conductive carbon, and binder polymer inside the composite electrode is essential to obtain a stable charge–discharge reaction. Using Ketjen black as a conductive carbon, a uniformly dispersed composite electrode was successfully fabricated for an acceptable charge–discharge reaction. Instead of a conventional polyvinylidene fluoride binder, a polymer electrolyte must be used as a binder polymer to provide an effective ionic conduction path inside the composite electrode. All-solid-state Na // P2-Na2/3[Ni1/3Mn2/3]O2 batteries exhibited excellent cycle performance even at 60 °C, while deterioration was more pronounced in the liquid electrolyte at the same temperature. The capacity retention of the P2-Na2/3[Ni1/3Mn2/3]O2 // hard carbon cell was further improved by coating P2-Na2/3[Ni1/3Mn2/3]O2 with Al-oxide.
科研通智能强力驱动
Strongly Powered by AbleSci AI