Interface Contact Thermal Resistance of Die Attach in High-Power Laser Diode Packages

The reliability of packaged laser diodes is heavily dependent on the quality of the die attach. Even a small void or delamination may result in a sudden increase in junction temperature, eventually leading to failure of the operation. The contact thermal resistance at the interface between the die attach and the heat sink plays a critical role in thermal management of high-power laser diode packages. This paper focuses on the investigation of interface contact thermal resistance of the die attach using thermal transient analysis. The structure function of the heat flow path in the T3ster thermal resistance testing experiment is utilized. By analyzing the structure function of the transient thermal characteristics, it was determined that interface thermal resistance between the chip and solder was 0.38 K/W, while the resistance between solder and heat sink was 0.36 K/W. The simulation and measurement results showed excellent agreement, indicating that it is possible to accurately predict the interface contact area of the die attach in the F-mount packaged single emitter laser diode. Additionally, the proportion of interface contact thermal resistance in the total package thermal resistance can be used to evaluate the quality of the die attach.